Tinadoc

if you need to change the Internet Interface from Ethernet Cable/ADSL to Static

1. login to Tina using a Admin/Reseller account
2. click on Gear, System then the connector Tab
3. Click in the Internet: drop-down and select Ethernet Router
4. Click Edit
5. Click Edit next to Ethernet router
6. Edit IP address: “add the new address” «< please make sure this address is not being used by anything else
7. Change the Netmask to the correct one for this network
8. click on ok
9. click on add next to Default route
10. type in the the gateway address
11. click ok, click ok, and click ok to link this network profile