Tinadoc

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

Example of setting up a port-forward to a non standard port (draft) 

port = 8443 TCP to a internal host  

firewall internet/local access from anywhere 

  - login as localadmin
  - click cog top right 
  - click admin
  - click securty tab
    - click left tab Services and then add
      - Add Service Name "8443"
      - add Max Port "8443"
      - Protocol TCP
      - click on append, then ok 
    - Click on Port-forward Targets
    - Click on add a new port-forward
    - add name "8443"
    - add Target Ip address 10.0.0.x
    - tick Show advanced option and click ok
    - click on drop down Forwarding Firewall service "8443"
    - Click ok, ok 
    - Click on Firewall Overview
    - click on internet/local
    - tick Show Advanced option, and click ok 
    - click on to Service drop-down and select "8443" and click on add
    - click on new rule drop-down and select forward: 8443
    - click on ok
    -